USB-6501 Datasheet. Download or read online NI (National Instruments) USB-6501 Small, portable digital I/O device/24 digital I/O lines, one 32-bit counter pdf datasheet. 24-Channel, 8.5 mA, Digital I/O Device—The USB-6501 is a portable, bus-powered USB digital I/O device, providing reliable data acquisition and control at a low price. The device provides overvoltage protection its digital I/O lines and a 32-bit counter. ![]() Issue Details Note: This document applies to NI-DAQmx Base 2.2 and previous. For more information regarding NI-DAQmx Base 3.0 and later, refer to The USB-6008, USB-6009, and the USB-6501 ship with installed firmware that allows you to use NI-DAQmx Base 2.2 and earlier. The first time one of these devices is plugged into a Windows machine with NI-DAQmx 7.5 or later installed, the NI-DAQmx driver automatically installs the firmware necessary to use NI-DAQmx, which disables the NI-DAQmx Base firmware. However, you can re-enable the NI-DAQmx Base firmware, and then switch back and forth between the NI-DAQmx Base and the NI-DAQmx firmware versions when using these devices. This article addresses the following: • How do I know what firmware is installed on my USB device? • How can I switch the firmware from NI-DAQmx to NI-DAQmx Base or vice-versa? • My USB device does not show up in Measurement and Automation Explorer (MAX). It does not show up in LabVIEW under the list of supported devices either. • The NI-DAQmx USB Driver Selector Option is missing in Measurement and Automation Explorer (MAX). Solution NI DAQmx 7.5 - 8.3 (Preferred Method) Switching to NI-DAQmx Base • Open the Windows Device Manager: • Right-click on My Computer and select Properties. • Select the Hardware tab and click on Device Manager. ![]() Ni Usb-6501 Driver For Mac• Find the USB-6008 under Data Acquisition Devices. • Right-click on the USB-6008 and choose Update Driver. • In the popup that appears, select Install from a list or specific location and click on Next. (note: this is not the default selection) • In the next window, choose Don't search. Usb 6501 OemI will choose the driver to install and click on Next. (note: this is not the default selection) • Select NI USB-6008 Multifunction IO and click on Next. • This will put the USB-6008 into a mode for receiving NI-DAQmx Base firmware. The device should now appear in the Device Manager under NI-VISA USB Devices. If it does not show up or shows up with a yellow exclamation point, please unplug the USB cable from the device and plug it back in. This should make the device re-enumerate properly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2019
Categories |